Lnxgeek.org Wiki - Freedom of choice, I choose Freedom

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Replace the init script provided by the package with this one:

<code>
#! /bin/sh
#
# postgrey      start/stop the postgrey greylisting deamon for postfix
#               (priority should be smaller than that of postfix)
#
# Author:       (c)2004-2006 Adrian von Bidder <avbidder@fortytwo.ch>
#               Based on Debian sarge's 'skeleton' example
#               Distribute and/or modify at will.
#
# Version:      $Id: postgrey.init 1436 2006-12-07 07:15:03Z avbidder $
#
### BEGIN INIT INFO
# Provides:          postgrey
# Required-Start:    $syslog $local_fs $remote_fs
# Required-Stop:     $syslog $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start/stop the postgrey daemon
### END INIT INFO

set -e

PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/postgrey
DAEMON_NAME=postgrey
DESC="postfix greylisting daemon"
DAEMON_USER=postgrey

PIDFILE=/var/run/$DAEMON_NAME.pid
SCRIPTNAME=/etc/init.d/$DAEMON_NAME

# Gracefully exit if the package has been removed.
test -x $DAEMON || exit 0

. /lib/lsb/init-functions

# Read config file if it is present.
if [ -r /etc/default/$DAEMON_NAME ]
then
    . /etc/default/$DAEMON_NAME
fi

POSTGREY_OPTS="--pidfile=$PIDFILE --daemonize $POSTGREY_OPTS"
if [ -z "$POSTGREY_TEXT" ]; then
    POSTGREY_TEXT_OPT=""
else
    POSTGREY_TEXT_OPT="--greylist-text=$POSTGREY_TEXT"
fi

ret=0

do_start()
{
        # Return
        #   0 if daemon has been started
        #   1 if daemon was already running
        #   2 if daemon could not be started
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
                || return 1
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
                $POSTGREY_OPTS "$POSTGREY_TEXT_OPT" \
                || return 2
}

do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
        start-stop-daemon --user $DAEMON_USER --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE
        RETVAL="$?"
        [ "$RETVAL" = 2 ] && return 2

	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently.  A last resort is to
	# sleep for some time.
	start-stop-daemon --user $DAEMON_USER --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"

}

do_reload()
{
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE
	return 0
}

case "$1" in
  start)
	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$DAEMON_NAME"
        do_start
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
        ;;
  stop)
	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$DAEMON_NAME"
        do_stop
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
        ;;
  reload|force-reload)
	[ "$VERBOSE" != no ] && log_daemon_msg "Reloading $DESC" "$DAEMON_NAME"
        do_reload
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
        ;;
  restart)
        do_stop
        do_start
        ;;
  status)
        status_of_proc -p $PIDFILE $DAEMON "$DAEMON_NAME" 2>/dev/null
        ret=$?
        ;;

  *)
        echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload|status}" >&2
        exit 1
        ;;
esac

exit $ret
</code>

Source: http://sources.debian.net/src/postgrey/1.35-1/debian/postgrey.init/