User Tools

Site Tools


When building a virtual machine using LSI disk controller you need to use a floppy image (in Windows XP at least).

Get the 32-bit driver here or here

Extract the zip file to /tmp/lsi

Do the following terminal-fu:

mkdir /tmp/floppy
mkfs.msdos -C /tmp/floppyimagefile.flp 1440
sudo mount -o loop /tmp/floppyimagefile.flp /tmp/floppy
sudo cp /tmp/lsi/* /tmp/floppy
sudo umount /tmp/floppy
cp /tmp/floppyimage.flp ~

You should now have the floppy image file called “floppyimagefile.flp” in you home directory.

Upload this file to your VMware storage and mount it on your floppy of the virtual machine.

Boot up the virtual machine and make it boot on the XP install CD. During the first blue screen (not BSOD!) press F6 (it also says to do so in the bottom of the screen). It will then look for the driver floppy and find our driver and thus enable it to find the disk.

If you don't want to play with terminal-fu and just want the driver floppy and get going (or running Windows and don't have access to the tools required :-) ), here is a pre-cooked floppy image:

howtos/building_floppy_image_for_lsi_driver.txt · Last modified: 02/12/2018 20:34 by